首页
产品列表 | Product List
电力测试仪器
变频串联谐振试验装置
无局放试验变压器
冲击电压电流发生器
试验变压器
移动式耐压试验台
大电流发生器
三倍频发生器
隔离变压器
直流高压发生器
绝缘油介电强度测试仪
全自动变比测试仪
高压开关机械特性测试仪
便携式主断路器测试仪
无线高压核相仪
雷电计数器校验仪
直流电阻测试仪
接地线成组直流电阻测试仪
回路电阻测试仪
微机继电保护测试仪
接地电阻测试仪
变压器空载短路测试仪
变压器特性综合测试台
变压器容量特性测试仪
变压器有载分接开关测试仪
氧化锌避雷器测试仪
介质损耗测试仪
互感器特性综合测试仪
分压器
发电机转子交流阻抗测试仪
双钳数字相位伏安表
相序表
真空度测试仪
绝缘电阻测试仪
电缆故障测试仪
绝缘靴手套耐压试验装置
电力安全工器具力学性能试验机
超低频高压发生器
变压器变形绕组测试仪
数字微安表
高压放电棒
试油杯
测试线、钳、夹
接地导通测试仪
直流系统接地故障定点仪
局部放电检测仪
电容电感测试仪
示波器
高低压开关柜通电试验台
耐压测试仪
三相钳形多功能相位伏安表
三相电能表现场校验仪
瓦斯继电器校验仪
二次压降及负荷测试仪
电流互感器二次回路负载测试仪
验电器高压发生器
钢丝绳探伤仪
太阳能光伏接线盒测试仪
矿用电机经济运行测试仪
电缆识别仪
函数信号发生器
直流断路器安秒特性测试仪
复合绝缘子检测仪
防雷元件测试仪
输电线路故障距离测试仪
交联电缆外护套故障探测仪
电缆试扎器
绝缘子等值盐密度测试仪
水泵综合测试仪
电脑裁线剥线机
变压器干燥空气发生器
直流试送仪
手表式近电报警器
绝缘杆(棒)绝缘绳索测试仪
验电器试验装置
电气绝缘强度检测仪
熔喷布高压静电发生器
滤油机类产品
SF6六氟化硫气体检测类
煤矿专用仪器
石油化工专用产品
电热电器产品
蓄电池测试仪
振动仪器产品
管道检测仪器
绝缘材料制品
联系我们 | Contact Us
扬州品胜电气科技有限公司
电 话:0514-88992611
传 真:0514-88268181
联系人:张春华
邮 箱:987006099@qq.com
网 址:www.yzpsdq.com
SF6气体回收装置
PSJX250 SF6气体回收净化充放装置
来源:扬州品胜电气科技有限公司 | 发布时间:2018/8/14 9:29:45 | 浏览次数:


PSJX250  SF6气体回收净化充放装置概述 Introduction

本装置系用于SF6气体绝缘电气设备的制造、使用及科研部门从SF6设备中回收。净化SF6气体,并有抽真空及充气能力的专用设备。This is a special purpose device, which can be used to reclaim and purify sf6 gas from the sf6 gas insulated electric equipment by persons who manufacture, user or research into the equipment. This device also has the functions of vacuum-pumping and gas filling.

PSJX250  SF6气体回收净化充放装置功能 Function

1、 该设备能对SF6电器开关抽真空并测定真空度。

vacuum pumping the sf6 switch and testing the limited vacuum.

2、 能对SF6电器开关充入SF6气体。

Back-filling the SF6 gas into the switch.

3、 能对SF6电器开关的气体进行回收。

Reclamation of the SF6 gas from the switch.

4、 能对回收的SF6气体净化处理。

Purification  and drying treatment of the reclaimed SF6 GAS.

5、 存储SF6气体。

Storage of the SF6 gas in pressure tank.

PSJX250  SF6气体回收净化充放装置主要元件 Main part

1、 真空泵 vacuum pump

Model: LEYBOL          R5—0040     40M³/H

2、 压缩机 compressor

Model: COPELAND        CA—0300     15M³/H

3、净化系统 filter-driers

          Model: CKD滤芯、F-03吸附剂  配有活化加热系统。

          It is used to filter and dry the gas. There is a F-03 absorption activating and heating system.

     4、冷却系统 cooling system

           热交换器,制冷系统,风冷机组   可使SF6液化存储。

          Heat-exchanger, refrigerating compressor, air cooling unit

5、存储罐 pressure tank(不含)

 100L容器,安全阀,压力2.5Mpa

 100Liter    safety valve     pressure 2.5Mpa

6、 阀门 valve

球阀 ball-valve

7、控制系统 control system

可进行装置的各项操作和仪表监视。

Using the control system, you can operate the device and monitor all the instruments。

8、连接管道 rubber hose

PSJX250  SF6气体回收净化充放装置技术参数 technical parameters

1、抽真空速率Rate of vacuum:40 M³/H    真空度 limited vacuum:100Pa

2、充气速率 rate of back-filling:15 M³/H

3、回收速率 rate of reclamation:12 M³/H

4、SF6回收率 reclamation percentage:98%

5、工作环境温度:working environmental temperature:

Upper limit:+45℃,lower limit:-10℃

6、存储罐 pressure tank:100L 2.5MPa(不含)

7、回收初压力 first pressure of reclamation:7bar

8、机组重量 weight of the device:400KG左右

9、电源 power: three-phase 380V±10%,50HZ

10、功率:Power:12kw

PSJX250  SF6气体回收净化充放装置操作程序图 Operating order

操 作 程 序 图

1

电器开关抽真空

依次打开:SF6电器开关阀、V3、V4、真空泵(V9即开即闭)

停机

依次关闭:SF6电器开关阀、V3、V4、真空泵

2

回收

依次打开:制冷压缩机、SF6开关电器阀、V3、V1、压缩机、V6、(灌气瓶开V5)

停机

依次关闭:SF6电器开关阀、V3、V1、压缩机、V6、制冷压缩机    V5

3

储气罐充气

依次打开:SF6 电器开关阀、V5、V6、V2、V3(控制流量合适)

停机

依次关闭:V5、V6、V2、V3、SF6电器开关阀

4

本机抽真空

依次打开:真空泵、V1、V4、V6、V2、封闭SF6电器接口

停机

依次关闭:V6、V4、V2、V1、真空泵

5

过滤器吸附剂活化处理

依次打开:电加热器、真空泵、V4、V1、加热60分钟左右

停机

依次关闭:电加热器、真空泵、V4、V1

备注:机组不使用时,所有阀门均关闭。储气罐有SF6气时,气罐不抽真空。

 

 

Operating order

1

Vacuum pumping ofSwitches

(start them in proper order):(start them in proper order ):SF6 switch valve,v3,v4,vacuum pump(start and stop the V9 valve at a time)

Stop the machine

(stop them in proper order):SF6 switch valve,V3,V4,vacuum pump

2

Reclaiming

(start them in proper order):refrigerating compressor,SF6switch valve,V3,V1,compressor,V6,V5

Stop the machine

(stop them in proper order):SF6 switch valve,V3,V1,compressor,V6,refrigerating compressor V5

3

Tank filling gas

 

(start them in proper order): SF6 switch valve,V5,V6,V2,V3 (the flow of controlling gas pot valve should gas be in proper)

Stop the machine

 

(stop them in proper order):V5,V5,V2,V3,SF6 switch valve

4

Vacuum pumping of the machine

(start them in proper order) vacuum pump,V1,V4,V6,V2

Stop the machine

(stop them in proper order):V6,V4,V2,V1,vacuum pump

5

Activation disposal of filter adsorbent

(start them in proper order):keep the power heater working for about an hour, vacuum pump,V4,V1

Stop the machine

(stop them in proper order):power heater,vacuum,V4,V1

Attention: while the unit is not being used, all the valves should be closed.

The pressure tank can not vacuum pump when there is gas pressure.

PSJX250  SF6气体回收净化充放装置注意事项 caution

1、使用前检查各部件,应完好无松动、无损坏。

Check up all the parts of the device for such as connection wiring each tighten,They should be in good condition,tight and undestroyed。

2、设备元件油位合适

Oil level of compressor and vacuum pump should be kept suitable.

3、真空泵不得反转。

Vacuum pump must not be reversed.

4、设备有气体压力时不能开V9。

V9 can be opened when there is gas pressure

5、回收气体时提前15分钟开制冷压缩机。

Open refrigerating compressor ahead of 15 minutes when reclaiming gas.

6、制冷压缩机打开时会有少量冷凝水排除。

There is little condensate water discharged when refrigerating compressor is opened.

 
TAG:SF6气体回收装置,SF6气体回收车,,sf6气体回收净化装置,,sf6回收充气装置,SF6气体回收充气装置
打印本页 || 关闭窗口
 上一篇:PSJX250 SF6气体回收装置
 下一篇:没有了!
版权所有·扬州品胜电气科技有限公司 地址:江苏宝应经济开发区安宜东路284号 本站最佳分辨率为1440*900
电话:0514-88992611 传真:0514-88268181 邮箱:987006099@qq.com 备案号:苏ICP备09040547号